TI25003 HVDC and FACTS Syllabus:
TI25003 HVDC and FACTS Syllabus – Anna University UG Syllabus Regulation 2025
COURSEOBJECTIVES:
• The problems in AC transmission systems and DC transmission systems.
• The operation and control of SVC and TCSC.
• The concepts of IGBT-based FACTS controllers.
• The basic operation of line-commutated converter (LCC) based HVDC links.
• The features of voltage source converter (VSC) based HVDC links.
UNIT I – INTRODUCTION
Reactive power control in electrical power transmission lines – Load and system compensation – Uncompensated transmission line – Shunt and series compensation – Need for HVDC transmission – Comparison between AC and DC transmission – Types of HVDC transmission systems.
UNIT II – STATIC VAR COMPENSATOR (SVC) AND THYRISTOR CONTROLLED SERIES COMPENSATOR (TCSC)
V–I characteristics of FC+TSR and TSC+TSR – Voltage control by SVC – Advantages of slope in dynamic characteristics – Influence of SVC on system voltage – Design of SVC voltage regulator – Thyristor controlled series compensator (TCSC) – Concept and operation of TCSC – Different modes of operation – Applications.
UNIT III – VOLTAGE SOURCE CONVERTER BASED FACTS CONTROLLERS
Static synchronous compensator (STATCOM) – Principle of operation – V–I characteristics – Applications: Steady state power transfer enhancement, enhancement of transient stability, prevention of voltage instability – Static synchronous series compensator (SSSC) – Operation and V–I characteristics – Enhancement of power transfer capability – Unified power flow controller (UPFC) – Operation principle – Applications.
UNIT IV – LINE COMMUTATED HVDC TRANSMISSION
Operation of Graetz bridge – Effect of delay in firing angle – Effect of commutation overlap – Equivalent circuit – Basic concept of HVDC transmission – Model of operation and control of power flow – CC and CIA modes of operation.
UNIT V – VSC BASED HVDC TRANSMISSION
Basic two level IGBT inverter operation – Four quadrant operation – Phase angle control – dq control – Control of power flow in VSC based HVDC transmission – Topologies of MTDC systems.
TOTAL: 45PERIODS
SKILL DEVELOPMENT ACTIVITIES (Group Seminar/Mini Project/Assignment/Content Preparation / Quiz/ Surprise Test / Solving GATE questions/ etc) 10
1. Simulation of FC + TSR connected to the IEEE 5-bus system.
2. Realization of reactive power support by SVC in open-loop and closed-loop control through simulation.
3. Regulation of line flows using TCSC and TSSC in closed-loop control through simulation.
4. Simulation of a two-terminal HVDC link with closed-loop control in CC and CIA modes.
5. Realization of four-quadrant operation of VSC in open-loop mode through simulation.
TEXTBOOKS:
1. R.Mohan Mathur, Rajiv K.Varma ,“Thyristor–Based Facts Controllers for Electrical Transmission Systems”, IEEE press and JohnWiley &S ons,Inc,2002.
2. Narain G.Hingorani, “Understanding FACTS-Concepts and Technology of FlexibleAC Transmission Systems”, Standard Publishers Distributors,Delhi110006,2011.
REFERENCES:
1. K.R.Padiyar,”FACTS Controllers in Power Transmission and Distribution”, New Age International (P) Limited, Publishers, New Delhi, 2008
2. A.T.John,“Flexible A.C.Transmission Systems”, Institution of Electrical and Electronic Engineers(IEEE),1999.
3. V.K.Sood, HVDC and FACTS controllers–Applications of Static Converters in Power System, APRIL2004, Kluwer Academic Publishers,2004.
