TI25004 Energy Management and Auditing Syllabus:

TI25004 Energy Management and Auditing Syllabus – Anna University UG Syllabus Regulation 2025

COURSE OBJECTIVES:
• To study the concepts behind economic analysis and load management.
• To understand the basics of materials and energy balance.
• To analyze energy efficiency in thermal utilities.
• To understand the concepts of compressed air systems.
• To illustrate the concepts of lighting systems and cogeneration.

UNIT I – GENERAL ASPECTS OF ENERGY MANAGEMENT AND ENERGY AUDIT
Commercial and non-commercial energy – Final energy consumption – Energy needs of growing economy – Energy pricing – Energy conservation and its importance – Restructuring of the energy supply sector – Energy Conservation Act 2001 and Energy Conservation (Amendment) Act 2010 and its features – Electricity tariff – Thermal basics – Need and types of energy audit – Energy management and audit approach – Understanding energy costs – Maximizing system efficiencies – Optimizing the input energy requirements – Energy audit instruments – Case study.

UNIT II – MATERIAL AND ENERGY BALANCE
Methods for preparing process flow – Material and energy balance diagrams – Energy policy purpose – Location of energy management – Roles and responsibilities of energy manager – Employee training and planning – Financial management: Financial analysis techniques, simple payback period, return on investment, net present value, internal rate of return – Case study.

UNIT III – ENERGY EFFICIENCY IN THERMAL UTILITIES
Introduction to fuels – Properties of fuel oil, coal and gas – Principles of combustion – Combustion of oil, coal and gas – Boilers: Types, combustion in boilers, performance evaluation, analysis of losses, energy conservation opportunities, FBC boilers – Steam system: Properties of steam, assessment of steam distribution losses, steam leakages, steam trapping, condensate and flash steam recovery system, identifying opportunities for energy savings – Furnaces: Classification, general fuel economy measures in furnaces, excess air, heat distribution, temperature control, draft control, waste heat recovery – Refractory: Types, selection and application of refractories, heat loss – Cogeneration: Classification and saving potentials – Case study.

UNIT IV – ENERGY EFFICIENCY IN COMPRESSED AIR SYSTEM
Compressed air system: Types of air compressors, efficient compressor operation, compressed air system components, leakage test, savings opportunities – Refrigeration system: Vapour compression refrigeration cycle, refrigerants, coefficient of performance, factors affecting refrigeration and air conditioning system, savings opportunities – Vapour absorption refrigeration system: Working principle, types and comparison with vapour compression system, saving potential – Cooling tower: Types and performance evaluation, efficient system operation, flow control strategies and energy saving – Diesel generating system: Factors affecting selection, energy performance assessment of diesel generator, energy conservation avenues – Case study.

UNIT V – ENERGY EFFICIENCY IN ELECTRICAL UTILITIES
Electrical load management and maximum demand control – Power factor improvement and its benefit – Selection and location of capacitors – Performance assessment of power factor capacitors – Automatic power factor controllers – Transformer losses – Electric motors: Types, losses in induction motors, motor efficiency, factors affecting motor performance, rewinding and motor replacement issues, energy saving opportunities with energy efficient motors, soft starters with energy saver, variable speed drives – Fans and blowers: Types, efficient system operation, flow control strategies – Pumps and pumping system: Types, system operation, flow control methods – Lighting system: Light source, choice of lighting, luminance requirements, ballast, occupancy sensors, energy efficient lighting controls, energy conservation avenues – Case study.

TOTAL:45PERIODS

SKILL DEVELOPMENT ACTIVITIES (Group Seminar/Mini Project/Assignment/Content Preparation / Quiz/ Surprise Test / Solving GATE questions/ etc) 10
1. Study of energy conservation and energy audit.
2. Performance study of electric motors.
3. Analysis of fan characteristic curves at different operating points.
4. Case study of illumination systems.
5. Performance analysis of compressors.

TEXTBOOKS:

1. Mehmet Kanoglu,YunusA Cengel,”Energy Efficiency and Management for Engineers”, McGraw-Hill Education, First Edition, 2020.

REFERENCES:
1. Moncef Krati, ‘Energy Audit of Building Systems: An Engineering Approach’, Third Edition, CRC Press, Dec.2020.
2. Sonal Desai,‘Handbook of EnergyAudit’,McGraw Hill Education (India)Private Limited, 2015.
3. MichaelP.Deru,JimKelsey,‘ProceduresforCommercialBuildingEnergyAudits’,American Society of Heating, Refrigerating and Air conditioning Engineers, 2011.
4. Thomas D.Eastop, ‘Energy Efficiency: For Engineers and Technologists’,Longman Scientific & Technical, 1990, 1st Edition.
5. ‘Energy Managers and Energy Auditors Guidebook’, Bureau of Energy Efficiency,2006.
6. LarryC. Witte,PhilipS.Schmidt, DavidR.Brown, ‘Industrial Energy Management and Utilization’, Springer Berlin Heidelberg, 1988.

List of Open Source Software/ Learning website:
1. http://lab.fs.uni-lj.si/kes/erasmus/Energy%20Management%20Handbook.pdf
2. https://www.sciencedirect.com/science/article/pii/S2212827114004491
3. https://mppolytechnic.ac.in/mp-staff/notes_upload_photo/ CS595EnergyEfficiencyinElectricalUtilities-5391.pdf
4. http://knowledgeplatform.in/wp-content/uploads/2017/03/1.3-Energymanagement-Audit.pdf