FD25304 Fluid Mechanics and Mechanical Operations Syllabus:

FD25304 Fluid Mechanics and Mechanical Operations Syllabus – Anna University UG Syllabus Regulation 2025

Objectives:
• To impart knowledge on the fluid properties and fluid statics principles
• To introduce the basic concept of fluid kinematics and dynamics
• To calculate the rate of flow and energy losses in flow through pipes and open channels
• To emphasize the concepts of boundary layer theory and the importance of dimensional analysis
• To impart the knowledge of pumps and turbines

Fluid Properties And Fluid Statics: Concept of Continuum, Properties of Fluid, Classification of fluids, Types of fluid flow Streamline, Streamlines, and path line, Pascals Law and Hydrostatic Law, Pressure and its variation in a static Fluid, Measurement of fluid pressure Manometers, Buoyancy and meta-Centre, Stability analysis and applications.
Activities: Understanding Fluid Types and Flow Behavior in Food Industries.

Fluid Kinematics And Dynamics: Continuity equation, Velocity Potential and Stream function, Bernoullis equation, and its applications, Impulse-Momentum principle, Impact of Jet, Velocity triangle.
Activities: Application of principles of fluid kinematics and dynamics in beverage industries.

Flow Through Pipes And Channels: Laminar and turbulent flows in circular pipes, Major and Minor losses in pipes, Darcy Weisbach equation, Hagen Poiseuille equation, Multi reservoir problems, pipe network design, Types of open Channel flows, Measurement of discharge in open channels, Notches, Most economical channel section.
Activities: Case studies on limitations of flow through pipes and channels in food industries.

Dimensional Analysis And Model Testing: Buckingham’s theorem and Application of theorem in fluid flow Reynolds, Froude, and Mach number and their applications in model testing, Boundary layer thickness, Momentum integral equation, Drag and lift, Separation of the boundary layer, and Methods of preventing the boundary layer separation.
Activities: Scale-up challenges from laboratory to food industry.

Hydraulic Machines: Centrifugal pumps, Work done, Head developed, Pump output and Efficiencies, priming – minimum starting speed, performance of multistage pumps, Cavitation, methods of prevention, Pump characteristics, Classification of hydraulic turbines, Pelton wheel, Francis turbine, Kaplan and turbines, Specific speed, Performance characteristics, Selection of turbines, Turbine efficiencies.
Activities: Application of hydraulic machines in food processing industries.

List of Experiments
1. Find the coefficient of discharge by suitable device that is most accurate to measure the fuel and air distribution in the carburetor of an IC engine in a two wheeler Also, in Pasteurization and Sterilization process. Discuss the effects of the Reynolds number and friction factor in relation to the rate of flow.
2. Analyze the friction factor of various pipes in a distribution of a water supply for domestic applications.
3. Determine the coefficient of discharge by suitable device used to monitor and control the flow of water and chemicals in water treatment plants.
4. Analyze the Lift and drag force of an aerofoil design used in a windmill for power generation.
5. Conduct the performance test of a suitable turbine that is used to extract energy from waterfalls whose water drops down from a height of about 500 m to generate power in Hydropower station.
6. Conduct the test from which electricity is to be generated has its reservoir fully filled up during the rainy season and the level drops down during summer. A turbine has to be put up such that it can accommodate both cases in a hydropower station.
7. Determine the efficiency of a pump to pump water to a very high elevation, say >300 ft, and high viscous fluid used for an irrigation and Chocolate Industry.

Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%

Assessment Methodology: Quiz (10%), Assignments (10%), Flipped Class (20%), Internal Examinations (60%)

References
1. Yunus A Cengel, and John M Cimbala, Fluid Mechanics, Third edition, Mc Graw Hill Education (India) Pvt Ltd, 2014
2. Dr R.K. Bansal , A textbook of Fluid Mechanics and Hydraulic Machines, Tenth Edition, Laxmi Publications, New Delhi, 2018
3. Frank M White, Fluid Mechanics, McGraw Hill Publishing Company Ltd, New Delhi, 8th Edition 2017
4. R C Hibbler, Fluid Mechanics, Pearson, First edition, 2017
5. S K Som and G Biswas, Introduction to Fluid Machines, 3rd Edition, McGraw-Hill Education 2017

E-Resources:
1.SWAYAM MOOCs on Fluid Flow Operations, Hydraulic Engineering, and Industrial Fluid Transport Systems