MV3811 Marine Workshop Practical and a float Training Syllabus:

MV3811 Marine Workshop Practical and a float Training Syllabus – Anna University Regulation 2021

OBJECTIVE:

To impart knowledge, skill and to train the students to be able to perform as Engineer officer on board ships.

*The students are required to undergo Marine Workshop Training in DG Shipping approved Marine Engineering Workshop for a duration of 6 months. The training should be as per the Merchant Shipping (Standard of Training Certification and Watch keeping for Seafarers) Rule 1998.

Competency on – use of hand tools used for marine equipment’s for dismantling, maintenance, repair and reassembly of shipboard equipment’s. – 100 hrs.

Competency on – use of hand tools used for electrical and electronic equipment’s, measuring and test equipment’s for locating and repairing faults and malfunctions. – 100 hrs.

Competency on – Operation of Main and Auxiliary machinery and associated control systems. – 30 hrs.

Competency on – Operating pumping systems & associated control systems. – 90 hrs.

Competency on – Operating alternators, generators & control systems.  – 100 hrs.

Competency on – Maintaining alternators, generators and Control systems. – 20 hrs.

Competency on – Maintaining Marine Engineering system including control systems (overhauling and maintenance of Marine Diesel Engines, air compressors, heat exchangers, oil separators etc.,) – 700 hrs.

Competency on – Controlling and fighting fire onboard. – 6 hrs.

Competency on – Operation of life saving appliances. – 6 hrs.
————
Total hrs. of Training: 1152 hrs.
————
The competency of the students are evaluated by the Marine Engineering Workshop and a report is sent to the college. During the training the students have to maintain a work dairy. After completion of this training the students will be examined as follows:
a) Assessment on work diary (Internal) 200 Marks.
b) *(i) Written test for 1 hour. 10 questions 10 X 10 = 100 Marks
(ii) Viva voce 200 Marks
————–
Total 500 Marks
————–
* Valuation by both Internal and External Examiners.

COURSE OUTCOMES:

On completion of the work shop training the students are expected to have acquired the sufficient knowledge

CO1: In operation, maintenance, repair and refit of Marine machines viz. main engine, auxiliary engines,
CO2: In operation, maintenance, repair and refit of Auxiliaries such as Compressors, Pumps, Steering gear, distillation plant, incinerator, sewage treatment plant etc.,
CO3: In using hand tools, electrical and electronic equipment’s,
CO4: In using Measuring and Testing Equipment’s for locating faults, malfunctions
CO5: In repairing faults and malfunctions
CO6: In operation, maintenance, repair and refit of Marine Electrical machines such as Alternators, Generators, Motors, Stabilizers
CO7: Overhauling and maintenance of heat exchangers, oil separators, filters etc.
CO8: Of Firefighting and Lifesaving Methods
CO9: On maintenance of systems and controls

REFERENCES:

1. Original Equipment Manufacturers Manuals for On Board Equipments
2. Benedict, “Nontraditional Manufacturing Processes”, 1st Ed. taylor & Francis, Indian reprint 2011 (Yesdee Publishings Pvt. Ltd.)
3. Bloch, “Machinery Component Maintenance and Repair”,3rd Ed. Elsevier, Indian Reprint 2010, (Yesdee Publishings Pvt. Ltd.)
4. Youssef, “Machining Technology”, 1st Vol., Taylor & Francis, Indian Reprint 2012 (Yesdee Publishings Pvt. Ltd.)
5. Paulin.D.S, Fowler.D.J., “Steering Gear” Marine Engineering Practice, Vol 1, Part 09, IMarEST, London, Reprint 1997
6. Wright.A.A, “ Exhaust Emission From Combustion Machinery”, Marine Engineering Practice, Vol 3, Part 20, IMarEST, London, 2000
7. Leigh Jones, Chris., “A Practical Guide to Marine Fuel Oil Handling,” Marine Engineering Practice, Vol 3, Part 19, IMarEST, London, 2008
8. Henshall. S.H, “Marine Medium Speed Diesel Engines,” Marine Engineering Practice, Vol 1, Part 03, IMarEST, London, Reprint 1998
9. Norris.A, “Prime Movers for Generation of Electricity(A) Steam Turbines”, Marine Engineering Practice, Vol 1, Part 02, IMarEST, London, Reprint 1998
10. Sterling.L, “Selection Installation & Maintenance of Marine Compressors”, Marine Engineering Practice, Vol 1, Part 01, IMarEST, London, Reprint 1996
11. Gopalakrishnan & Banerji, “Maintenance and Spare Parts Management”, PHI Learning Pvt. Ltd., 2010
12. Mishra and Pathak, “Maintenance Engineering and Management,” 2nd Ed., PHI Learning Pvt. Ltd., 2012
13. Venkataraman, “Maintenance Engineering and Management,” 1st Ed., PHI Learning Pvt. Ltd., 2010
14. Alan Rowen, Raymond Gardner, Jose Femenia, David Chapman, and Edwin Wiggins, “Introduction to Practical Marine Engineering”,1st Ed.,SNAME, 2005
15. Roy L. Harrington, “Marine Engineering”, 1st. Ed., SNAME, 1992
16. GTH. Flanagan, “Marine Boilers” 3rd Edition, Butter worth, London, 2001.
17. K.M.B. Donald, “Marine Steam Turbines”, 1st Edition, Institute of Marine Engineers, London, 1977.
18. L.Jackson & T.D. Morton, “General Engineering Knowledge for Marine Engineers”, 4th Edition, Thomas Reeds Publication, United Kingdom, 1986.
19. Norris.A, “Operation of Machinery in Ships Steam Turbines, Boilers”, Marine Engineering Practice, Vol 2, Part 15, IMarEST, London, Reprint 2000
20. Edmund G.R, Kraallavers , “Advanced Electo-technology For Marine Engineers”, 2nd Ed. Reeds Vol 07, Adlard Coles Nautical, London, 1999
21. W.Laws, “Electricity Applied To Marine Engineering”, 4th edition, The Institute Of Marine Engineers, London, 1998.