VL25301 Digital Logic Design Syllabus:
VL25301 Digital Logic Design Syllabus – Anna University UG Syllabus Regulation 2025
Course Objective:
This course provides a comprehensive understanding of Boolean algebra and logic minimization techniques to optimize digital circuit designs. It covers the design and analysis of combinational and sequential circuits, including arithmetic units, multiplexers, encoders, flip-flops, counters, and shift registers. Students will also explore memory technologies, programmable logic devices, and implement digital systems using both synchronous and asynchronous methods with VHDL.
Minimization Techniques and Logic Gates
Minimization Techniques
Boolean postulates and laws – De-Morgan‟s Theorem – Principle of Duality – Boolean expression – Minimization of Boolean expressions – Minterm – Maxterm – Sum of Products (SOP) – Product of Sums (POS) – Karnaugh map Minimization – Don‟t care conditions – Quine – Mc Cluskey method of minimization.
Logic Gates: AND, OR, NOT, NAND, NOR, Exclusive–OR and Exclusive–NOR Implementations of Logic Functions using gates, NAND–NOR implementations – RTL, TTL, ECLand CMOS Logic and their characteristics – Tristate gates
Combinational Circuits
Design procedure – Half adder – Full Adder – Half subtractor – Full subtractor – Parallel binary adder, parallel binary Subtractor – Fast Adder – Carry Look Ahead adder – Serial Adder/Subtractor – BCD adder – Binary Multiplier – Binary Divider – Multiplexer/ Demultiplexer – decoder – encoder – parity checker – parity generators – code converters – Magnitude Comparator.
Sequential Circuits
Latches, Flip-flops – SR, JK, D, T, and Master-Slave – Characteristic table and equation –Application table – Edge triggering – Level Triggering – Realization of one flip flop using other flip flops – serial adder/subtractor- Asynchronous Ripple or serial counter – Asynchronous Up/Down counter – Synchronous counters – Synchronous Up/Down counters – Programmable counters – Design of Synchronous counters: state diagramState table –State minimization –State assignment – Excitation table and maps-Circuit implementation – Modulo–n counter, Registers – shift registers – Universal shift registers – Shift register counters – Ring counter – Shift counters – Sequence generators.
Memory Devices
Classification of memories – ROM – ROM organization – PROM – EPROM – EEPROM – EAPROM, RAM – RAM organization – Write operation – Read operation – Memory cycle – Timing wave forms – Memory decoding – memory expansion – Static RAM CellBipolar RAM cell – MOSFET RAM cell – Dynamic RAM cell –Programmable Logic Devices – Programmable Logic Array (PLA) – Programmable Array Logic (PAL) – Field Programmable Gate Arrays (FPGA) – Implementation of combinational logic circuits using ROM, PLA, PAL
Synchronous and Asynchronous Sequential Circuits
Synchronous Sequential Circuits: General Model – Classification – Design – Use of Algorithmic State Machine – Analysis of Synchronous Sequential Circuits
Asynchronous Sequential Circuits: Design of fundamental mode and pulse mode circuits – Incompletely specified State Machines – Problems in Asynchronous Circuits – Design of Hazard Free Switching circuits. Design of Combinational and Sequential circuits using VHDL/Verilog.
References:
1. M.MorrisMano,“DigitalDesign”,4th Edition, Prentice Hall of India Pvt.Ltd.,2008/ Pearson Education (Singapore) Pvt.Ltd., New Delhi,2003.
2. JohnF.Wakerly,“Digital Design”, Fourth Edition, Pearson/PHI,2008
3. John.M Yarbrough,“Digital Logic Applications and Design”, Thomson Learning, 4. 2006.
4. Charles H.Roth.“Fundamentals of LogicDesign”,6th Edition, Thomson Learning, 6. 2013.
5. Donald P.Leach and Albert Paul Malvino, “Digital Principles and Applications”,6th Edition,TMH, 2006.
6. ThomasL.Floyd,“DigitalFundamentals”,10thEdition,Pearson Education Inc, 2011
7. Donald D.Givone,“Digital Principles and Design”,TMH,2003.
Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%.
Assessment Methodology: Assignment (20%), Software activity (20%), Quiz (20%), Internal Examinations (40%).
