VL25405 Digital VLSI Design Lab Syllabus:

VL25405 Digital VLSI Design Lab Syllabus – Anna University UG Syllabus Regulation 2025

Course Objective:
The objective of this course is to introduce HDL programming using System Verilog for design and verification of VLSI circuits. It also aims to provide hands-on practice on EDA tools and get familiar with the VLSI circuit design, functional verification, synthesis and timing simulation.

List of Experiments:
1. Analysis of CMOS process Transistors(NMOS, PMOS)
a. Plot ID vs. VGS at particular drain voltage (low) for NMOS, PMOS and determine Vt.
b. Plot log ID vs. VGS at particular gate voltage (high) for NMOS, PMOS and determine IOFF and sub-threshold slope.
c. Plot ID vs. VDS at different gate voltages for NMOS, PMOS and determine Channel length modulation factor.
d. Analyse the effect of transistor size on threshold voltage, power and delay.
2. Design a static CMOS inverter and analyze its characteristics (DC characteristics, noise margins, and switching characteristics). Generate Manual / Automatic Layout. Perform Pre-layout and Post-layout simulation. Analyze Area, Power and Timing. Use appropriate EDA Tools.
3. Design and simulate a static CMOS 2 input NAND gate. Generate Manual/ Automatic Layout. Perform Pre-layout and Post-layout simulation. Analyze Area, Power and Timing.
4. Design, simulate and analyse power, and delay of an inverter using Static CMOS, Pass Transistor, Dynamic, Domino, and CVSL logic.
5. Design and simulate CMOS D Flip-Flop, SDFF, TSPC Flip Flop. Analyze the power and delay.
6. Design and simulate a 6T SRAM cell. Perform read and write operations and determine power consumption during read/write. Measure the read and write access time.
7. Design and simulate 1T DRAM.
8. Study of programming with System Verilog (Activity: Flipped class room activity and online quiz.)
Components of System Verilog- Literal values- data Types – Arrays – QueuesStrings-Composite Type – Expressions – Behavioral modeling, Structural modeling – Packages – Tasks and Functions –Verification using System Verilog: Clocking and Program block – Events – Random constraint generation – Assertions – Immediate assertions – Concurrent assertions.
9. Write the HDL program for 4 X 1 Multiplexer and 1 X 4 Demultiplexer in Behavioural and Data flow modelling.
10. Demonstrate Arrays and Queues, Task and Functions, Process Control, Random sequence generation, Immediate and Concurrent assertions with System Verilog.
11. Write the HDL program for the following using System Verilog. Perform functional verification, Synthesis (Device Utilization and Timing Report). Verify using System Verilog assertions and perform post synthesis timing simulation.
i. Adder (Carry skip adder, Carry look ahead adder)
ii. Multiplier (Array multiplier, Booth multiplier)

Task 1: Low-Power CMOS Circuit Design Project
Design a low-power CMOS inverter/NAND circuit using EDA tools, perform layout, and compare pre-layout vs post-layout results.
Task 2: Memory Cell Design for Embedded Systems
Develop a 6T SRAM cell, simulate read/write operations, and optimize for speed and power consumption for embedded applications.
Task 3: Team-Based HDL Design & Verification
In teams, design and verify a digital system (MUX/DEMUX or Flip-Flop) using SystemVerilog with assertions and test benches.
Task 4: Comparative Study of Logic Styles
Analyze different logic families (Static CMOS, Dynamic, Domino, CVSL) and present a report comparing power, delay, and area for real-world VLSI applications.

Weightage: Continuous Assessment: 60%, End Semester Examinations: 40%

Assessment Methodology: Project (30%), Assignment (10%), Practical (30%), Internal Examinations (30%)

References:
1. J.Bhasker, “A System Verilog : Primer”, 2001