TT25C04 Technology of Weaving I Syllabus:

TT25C04 Technology of Weaving I Syllabus – Anna University UG Syllabus Regulation 2025

Course Objective: This course introduces students to impart fundamental knowledge and practical skills in yarn winding, warping, sizing, and drawing-in processes used in textile manufacturing. The course emphasizes process control, fault analysis, machine mechanisms and productivity enhancement to ensure quality and efficiency in yarn preparation for weaving.

Winding: Objectives of winding; principles of drum and precision winding machines; material passage in ordinary cone winding machine; tensioning devices – uniform build of yarn package – control of balloons; Yarn traverse – types of drums – half accelerated and fully accelerated drums; Classification of yarn faults and their removal; yarn clearing – mechanical, optical and electronic clearers; knotters and splicers, material passage and working principle of modern automatic cone winding machines and weft winding machines; winding calculations – production and efficiency in cone winding and pirn winding machines
Practical:
1. Study of ordinary cone winding machine
2. Analysis of yarn faults
3. Control of production, package density, yarn faults in cone / cheese winding machine
4. Study of pirn winding machine
5. Study of automatic cone winding machines
Activities: comparison of salient features of conventional and automatic winding machine, solving of GATE questions.

Process Control in Winding: Faults in cones/chesses – causes and remedies; modifications required for winding synthetic and blended yarns; winding for colouration; quality of knots and splices; winding performance; productivity; maintenance; quality control; material handling.
Activities: sketching of various knots and splices, preparation of maintenance schedule for winding machines, preparation of pictographs of yarn faults, solving of GATE questions.

Warping: Objectives of warping – material flow in modern high speed beam warping machine; creels and tensioning devices used in warping machines; sectional warping machines – objectives and material flow in sectional warping machine; Defects in warp beams – causes and remedies; beam warping calculations – production and weight of warp beam; Sectional warping calculations -number of sections, number of patterns per section, width of warp and total number of ends in the warp.
Activities: specifications and salient features of conventional and modern warping machines, pattern preparation in sectional warping, solving of GATE questions.

Sizing: Sizing – objectives of sizing – sizing ingredients and recipe preparation for different types of fibres; size preparation equipment; sizing machines – material flow in multi cylinder sizing machine – size level, size viscosity, drying temperature, stretch and moisture controls in sizing; sizing filament yarns; concept of single end sizing and combined dyeing and sizing; energy conservation in sizing; sizing defects; sizing calculations – production, size pick up percentage, efficiency, sized yarn count and weight of sized warp.
Practical:
1. Study of warping machine
2. Study of sectional warping machine
3. Study of sizing machine
Activities: preparation and comparison of size paste for various yarns, sketching and naming the parts of modern sizing machines, solving of GATE questions.

Process control in Warping and sizing: Process control in warping – production calculation, machine and labour productivity, hard waste, efficiency, production, creel capacity, number of back beams in warping; sectional warping – calculation – creel capacity; Control systems used in sizing machine
Activities: Tabulate the causes for warping and sizing defects, principles of control mechanism used in modern sizing machines, solving of GATE questions.

Drawing-in and denting: Drawing-in and denting operation – manual and automatic drawing- in, leasing, knotting and pinning machines; selection and care of reeds, healds and drop pins; control of cross ends and extra ends
Practical: Study of drawing – in, denting and tying
Activities: Sketching of various parts of drawing-in and denting machine, reed count calculations.

Weightage: Continuous Assessment: 50%, End Semester Examinations: 50%

Assessment Methodology for continuous assessment (50%) : Theory: 30%, practical 10% , activity 10% (Assignments, seminar, quiz, objective type test, project model)

References:
1. John A. Iredale “Yarn Preparation: A Hand Book”, Textile Institute, Manchester,1992, ISBN:1853390429.
2. MilindVasudeoKoranne, “Fundamentals of Yarn Winding”, Woodhead Publishing,India, 2013,ISBN: 978-1-78242-068-2.
3. Goswami B.C., Anadjiwala R.D. and Hall D.M.., “Textile Sizing”, Marcel Dekker, NewYork, 2004,ISBN: 0-8247-5053-5.
4. Baneerjee.P.K., “Principles of Fabric Formation”, CRC Press, London,2014, ISBNNumber:13:978-1-4665-5445-0.
5. Abhijit Majumdar, Apurba Das, R.Alagirusamy and V.K.Kothari., “Process Control in Textile Manufacturing”, Wood Head Publishing Limited, Oxford, 2013, ISBN: 978-0- 85709-027-0.
6. Lord P.R. and Mohammed M.H., “Weaving – Conversion of Yarn to Fabric”, Merrow Publication, 1992.

E-Resources:
1. https://nptel.ac.in/courses/116102005
2. https://nptel.ac.in/courses/116102012
3. https://nptel.ac.in/courses/116102019
4. Swayam courses on weaving