PT25304 Fundamentals of Chemical Engineering Syllabus:

PT25304 Fundamentals of Chemical Engineering Syllabus – Anna University UG Syllabus Regulation 2025

Course Objectives:
• To learn the fundamental operation involved in chemical engineering
• To attain the knowledge in the subject of fluid flow
• To gain the ideas in the field of heat transfer operation
• To learn the mass diffusion in polymers by the study or mass transfer operations
• To acquire knowledge about various unit operations

Fluid flow: Fluid Flow: Newtonian and Non-Newtonian fluid – Bernoulli’s theorem-Hagen Poisuille equation, measurement of fluid flow- orifice meter, venturi meter and pitot tube.
Practical: Measurement of fluid flow using Venturi meter / Orifice meter.
Activities: Study the difference between Newtonian fluid and non-Newtonian fluids with real-life examples.

Mechanical operations: Properties of solids – Sieve analysis; Laws of crushing, Crushers and grinders. Principle of separation and selection and details of equipment for screening, cyclones and hydro cyclones (Basic principles and equipment description only. Mathematical consideration not required).
Practical: Sieve Analysis of Sand
Activities: Study of a Jaw Crusher

Heat transfer: Modes of heat transfer; Heat transfer by conduction – Fourier’s law, conduction across composite walls. Heat transfer by natural & forced convection. Co current, counter current, shell & tube heat exchangers (Basic principles and equipment description only. Mathematical consideration not required).
Practical: Heat exchanger
Activities: Study of Shell and Tube Heat Exchanger

Mass transfer: Principles of diffusion, theory of diffusion, Two film theory and mass transfer coefficients Humidification – operation, humidity chart, equipment’s – cooling towers and spray chambers Drying – Principles and definitions. Rate of batch dryingEquipment for drying (Basic principles and equipment description only. Mathematical consideration not required).
Practical: Drying of Wet Solid (Batch Drying)
Activities: Study of Cooling Tower (Humidification Equipment)

Unit operations: Absorption – Principle and equipment (packed towers and plate columns). Distillation – flash distillation, and Binary distillation. Industrial equipment for distillation Adsorption – Principle and equipment for adsorption. (Basic principles and equipment description only. Mathematical consideration not required)
Practical: Simple Distillation
Activities: Study of Packed Tower (Absorption Equipment)

Weightage: Continuous Assessment: 50%, End Semester Examinations: 50%

Assessment Methodology: Theory (30%), Practical (10%), Activities (10%).

References:
1. W.L .Mc Cabe, J.C. Smith, “Unit Operations of Chemical Engineering”, McGrawHill,7th edition 2014.
2. Shri. K.A. Gavhane, “Unit Operations I & II”, NiraliPrakashan Publication, 2015.
3. Ghosal, S.K., Sanyal, S.K., Datta, S., “Introduction to Chemical Engineering”, Tata McGraw-Hill Publishing Company Ltd., New Delhi(1997).
4. Richardson and Coulson, “Chemical Engineering”, Vol. 1, Elesvier, 6th Edition 2006.
5. J. M. Smith, H. C. Van Ness, M. M. Abbott and M. T. Swihart “Introduction to Chemical Engineering Thermodynamics” McGraw-Hill Education, 2 Perm Plaza, New York, NY, 8th Edition 2018.

E-resource(s):
1. NPTEL
2. MIT Open Course Ware
3. LearnChemE