PT25404 Plastics Moulds and Dies Technology Syllabus:

PT25404 Plastics Moulds and Dies Technology Syllabus – Anna University UG Syllabus Regulation 2025

Course Objectives:
• To impart knowledge on Various Molds types, Mold making and Material of mold selection.
• To impart knowledge on Elements of the mould and manufacturing processes.
• To impart knowledge on Application of additive manufacturing in mould development
• To impart knowledge on Advanced measuring instruments for inspection of mold

Injection Mould Design: Introduction to injection moulds- mould parts its factions and classification sprue bush – Locating ring – Guide pillar & bush – Integer & Insert bluster type core & cavity – Bolsters – Inserts – Mould Clamping Assembly of Moulds – Shrinkage consideration for Core & Cavities – Design requirement for quality moudlings plate moulds – Mould Plates – CAD/CAM applications in mould design – materials used in mould making – Requirements of mould material – Ferrous and Non ferrous materials used in injection moulds – Heat treatment requirements for mould materials. Parting line – Parting surface – type of parting surfaces – mould relieving – Mould Venting – Criteria’s for selection of injection moulding machine – Clamping force – Shot Weight – Shot Capacity – Day light distance – Projected area – Injection pressure – Distance between tie bars – Calculation of no. of impressions for a mould – Standard Mould base – Advantages & Limitations – Manufacturers of standard mould bases – Standard mould parts – Selection of mould base and accessories.
Activities: Study of Injection Mould for a Plastic Component.

Design of Feed Ejection and Cooling Systems: Feed System: Sprue, runner and gates – Cross Section and Size of runner – runner types & runner efficiency – rubber layout – balancing of runners – types of gates – gate balancing – Empirical formulae for runner and gate. Ejector System: Ejection system major division – Ejector grid – its types – Ejector plate assembly – Ejector assembly return system – Stop button – types of ejection – sprue pullers- Calculation of rejection force – ejection stroke – Calculation of support pillar requirements – Mould temperature control system – Mould cooling – Cooling Integer type cavity and core plates – Cooling of bolsters – Cooling of cavity inserts – Cooling of core inserts – O ring, Heat Pipe and Heat rods – Adaptors and Plugs for cooling circuits – Calculation of Cooling efficiency – Introduction to confirmal cooling.
Activities: Study of how plastic flows, solidifies, and is ejected by designing the three critical mould systems.

Design of Compression and Transfer Moulds: Introduction to compression moulds – Open Hash, Semi Positive, Positive and Displacement moulds – Types of loading chambers – Bulk factor – Flash Thickness – Projected area – Compression Pressure – Clamping Force – No. of impressions by technological method – Heating System – Types of Heaters – Heat Requirement – Heat Loss – heater capacity – Loading Chamber design – Mould Material Transfer Mould – Its types – integral pot transfer mould, auxiliary ram – transfer pot design – Projected area – transfer pressure – Clamping force – Pressure Pad design – Design of Sprue, runner and gate for transfer mould – Advantages and disadvantages of transfer mould – transfer Pot and Plunger Calculations – Mould material.
Activities: Study on design of Compression and Transfer Moulds.

Design of Blow Moulds & Extrusion Dies: Blow mould Design – Material for blow mould- types of blow moulds – Blow ratio – parison – Parison Programming – Blow Moulded Container Terminology – Panch off design – mould alignment – mould venting – mould cooling – Priform extrusion die design – Principles of extrusion – Extruder die geometry – Die material – Die Swell – Die Land design – sizing equipment, screen peak and breaker plates – Construction of extrusion dies – Dies for rod – Dies for Pipe – Dies for blown film – Dies for flat film – dies for profile – dies for wires cables – Die mandrel – Spider – Plastic Materials used for extrusion – Mel flow index – Co extrusion dies.
Activities: Understand and design tooling used in blow and extrusion processes by creating basic mould and die layouts for simple plastic products.

Advanced Injection Mould Design & Mould Maintenance: Introduction to Design of mould, Care and Maintenance – Working Principle and Construction – Principles and rule of design for mould – Engineering and design procedure – Dimension and mould drawings – Mould stamping – Causes of wear and damage – Preventive maintenance of moulds
Activities: Understand and Develop advanced skills in mould design (multi-cavity, hot runner, complex geometries) and understand practical maintenance techniques to improve mould life
and product quality.

Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%

Assessment Methodology: Assessment I (35%), Assessment II (35%), Activities (30%).

References:
1. DuBois J. Harry: Plastics Mold Engineering Handbook (English, Paperback, Springer- Verlag New York Inc.4th Edition November 2013
2. .Klus S DuBois J. Harry, Plastics Mold Engineering Handbook (English, Paperback, , Hanser Publishers, NY, 3rd Edition 2013
3. Peter Jones, “The Mould Design Guide”, Smithers Rapra Technology Ltd., 2008
4. R.G.W.Pye, Injection Mold Design, East West Press Pvt. Ltd., New Delhi.,2000.
5. Hajra Chouldhary S.K and Hajra Choudhury. AK., “Elements of workshop Technology”, volume II, Media promoters and Publishers Private Limited, Mumbai, 2010.
6. Peter Jones, “The Mould Design Guide”, Smithers Rapra Technology Ltd., 2008.
7. W.A.J Chapman, Workshop Technology, Vol I & II, ELBS.
8. Herbert Rees, Mold Engineering, Hanser Publishers, NY.,2002.
9. George Menges & Paul Mohren, How To Make Injection Molds, Hanser Publishers,2001.
10.Douglas M. Bryce, Plastic Injection Molding manufacturing process fundamentals, Society of Manufacturing Engineers, Dearborn, Michigan.,1996.
11.Jain R K ,” Engineering Metrology” , 19th Edition , Khanna Publishers , 2005.
12.Gaylor, Shotbolt and Sharp, Metrology for Engineers, Publisher: O.R.Cassel, London,1993.

E-resource(s):
1. LearnChemE
2. PlasticsEurope
3. Engineering Toolbox