EL25303 Fluid and Solid Operations Syllabus:

EL25303 Fluid and Solid Operations Syllabus – Anna University UG Syllabus Regulation 2025

Course Objective: To impart the students, the knowledge on fluid properties, fluid static and dynamic characteristics flow metering and transport, particle mechanics, techniques of solid – fluid separation

Properties of Fluid: Newtonian fluids Classification of fluid motion Fluid statics – equilibrium of fluid element – pressure variation in a static fluid – Differential analysis of fluid motion – continuity, Euler’s and Bernoulli equation, Navier-Stokes Equation, Hagen-Poiseuilli flow.
Activities: Assignment on fluid statics, quiz on derivations.

Flow Through Pipes: Reynolds number regimes, boundary layer concepts; flow through pipes – pressure drop under laminar and turbulent flow conditions; ; Friction factor, Moody Chart, Flow meters; different types of flowmeters; Valves, pumps, compressors – characteristics and sizing; Agitation and Mixing;
Size Analysis: General characteristics of solids, techniques of size analysis; Laws of size reduction, equipment for size reduction
Activities: Solving numerical problems on flow through pipes.

Flow Through Fluidized Beds: Flow over a sphere – friction and pressure drag – flow through fixed and fluidized beds. Filtration – batch and continuous, filtration equipment – selection, operation.
Classifiers: Screening, gravity separation – sedimentation, thickening, elutriation, classifiers – Centrifugal separation – continuous centrifuges, cyclones and hydro cyclones, electrostatic and magnetic separators
Activities: Analysis of filtration systems. Case studies on industrial separation techniques; numerical problems on sedimentation and centrifugation.

Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%.

Assessment Methodology: Assignments (20%), Quiz/MCQ (20%), Solving numerical questions (10%), Internal Examinations (50%).

References:
1. Noel de Nevers, “Fluid Mechanics for Chemical Engineers”, Second Edition, McGraw-Hill, (1991).
2. Badger W.L. and Banchero J.T., “Introduction to Chemical Engineering”, Tata McGraw Hill, 1997.
3. Munson, B. R., Young, D.F., Okiishi, T.H. “Fundamentals of Fluid Mechanics”, 5th Edition “, John Wiley, 2006
4. McCabe W.L, Smith, J C and Harriot. P “Unit operations in Chemical Engineering”, McGraw Hill, V Edition, 2001
5. Coulson, J.M. and Richardson, J.F., “Chemical Engineering” Vol. I, 4th Edn., Asian Books Pvt. Ltd., India, 1998.

E-Resources: NPTEL Lectures on Fluid Mechanics and Particle Technology