CH25C06 Heat Transfer Syllabus:

CH25C06 Heat Transfer Syllabus – Anna University UG Syllabus Regulation 2025

Course Objectives: To provide knowledge on conduction, convection, radiation, phase change heat transfer and heat exchanger design for chemical engineering applications.

Conduction: Introduction to heat transfer-General heat conduction equation, One dimensional steady state conduction in rectangular coordinate, One dimensional steady state conduction in cylindrical and spherical coordinate; Critical and optimum insulation; Extended surface heat transfer; Transient heat flow – Analysis of lumped parameter model – applications.
Practicals:
1. Measurement of thermal conductivity
2. Heat transfer studies through composite wall
3. Heat transfer in Bare and Finned Tube Heat Exchanger
Activities: Analyze steady and transient heat conduction problems in different geometries.

Convection: Introduction to Convective Heat Transfer; Dimensional analysis for -forced convection, free convection; Heat transfer co-relations for – laminar and internal flows, turbulent and internal flows, Co-relation for turbulent and external flows, for flow across tube banks, Momentum.Heat transfer analogies; Boundary layer heat transfer- Equations, Approximate analysis in boundary layer, Theoretical concepts of natural / free convention heat transfer; Empirical relations for free convention heat transfer.
Practicals: Heat transfer studies by forced convection
Activities: Analyze convective heat transfer mechanisms under forced and natural convection, apply dimensional analysis and empirical correlations.

Heat Exchanger: Classification of heat exchangers; Co-current, Counter current& Cross current; log-mean temperature difference; overall heat transfer coefficient; fouling factors. Various types of shell and tube heat exchangers; Effectiveness-NTU; method of heat exchanger analysis; Design of – double pipe heat exchanger, shell and tube heat exchanger & Plate and Spiral Heat exchangers.
Practicals:
1. Heat transfer Studies in Shell and Tube heat exchanger
2. Heat transfer in Double pipe heat exchanger
Activities: Perform preliminary design calculations for industrial heat exchangers.

Heat Transfer with Phase Change: Boiling and Condensation-Types-Condensation heat transfer over vertical plate, Condensation heat transfer for various conditions & geometries, Fundamentals of boiling heat transfer, boiling heat transfer co-relations.
Evaporation: Types of evaporators, boiling point elevation and Duhring‘s rule, material and energy balances for single and multiple effect evaporators: forward, mixed and backward feeds, capacity and economy of evaporators.
Practicals:
1. Heat transfer in Horizontal and vertical condenser
2. Heat transfer in Helical coil
Activities: Analyze boiling and condensation heat transfer mechanisms, evaluate evaporator performance and economy, solve material and energy balance problems in multiple effect evaporators.

Radiation & Industrial Applications: Introduction to radiation heat transfer, Thermal Radiation laws, Black and Gray bodies, Properties of a Blackbody, Kirchhoff’s Law, Radiation intensity and radiation view factor, Radiation heat exchange, Radiation shield and gas radiation, emissivity, radiation between black surfaces and grey surfaces. Solar radiations, combined heat transfer coefficients by convection and radiation. Industrial applications -Heat transfer through packed and fluidized bed.
Practicals:
1. Emissivity measurement
2. Heat transfer in packed column
Activities: Analyze radiative heat transfer between surfaces.

Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%.

Assessment Methodology: Assignments (20%), Experimental data analysis and heat transfer calculations (20%), Quiz/MCQs (20%), Internal Examinations (40%).

References:
1. Incropera, F. P. & Dewitt, D. P., (2011), Fundamental of Heat and Mass Transfer,John Wiley & Sons ISBN-10: 0-471-45728-0
2. Holman, J. P., ‘Heat Transfer ’, 8th Edn., McGraw Hill, 1997. ISBN-10 : 0078447852
3. Ozisik, M. N., Heat Transfer: A Basic Approach, McGraw-Hill, 1984 ISBN-10 : 0070479828
4. Kern, D.Q., “Process Heat Transfer “, McGraw-Hill, 1999. ISBN-10 : 0070341907
5. Cengel, Y.A. (2002) Heat Transfer: A Practical Approach. 2nd Edition, McGraw-Hill, New York.
6. Coulson, J.M. and Richardson, J.F., “Chemical Engineering “Vol. I, 4th Edn., Asian Books Pvt. Ltd., India, 1998.
7. McCabe, Warren L., Julian C. Smith, and Peter Harriott. Unit Operations of Chemical Engineering. 5th ed. New York; London: McGraw-Hill, 1993.

E-Resources:
1. NPTEL courses on Heat Transfer and Process Heat Transfer.
2. SWAYAM online modules on conduction, convection and radiation heat transfer.
3. Virtual laboratory simulations for heat exchangers and phase change heat transfer.