AU25301 Automotive Engines Syllabus:
AU25301 Automotive Engines Syllabus – Anna University UG Syllabus Regulation 2025
Course Objectives:
The course provides an understanding of the fundamentals, components, and operating cycles of internal combustion engines, along with fuel supply and ignition systems of SI and CI engines. It also covers combustion processes and the importance of cooling and lubrication systems for efficient engine operation.
Engine Fundamentals: Introduction – Classification of IC Engines – Engine Terminology – Engine Components and Materials – Working Principles of SI and CI Engines –Comparison of SI and CI Engines–Two-Stroke and Four-Stroke SI Engines – Two-Stroke and Four-Stroke CI Engines – Valve Timing and Port Timing Diagrams – Fuel–Air Cycle and Actual Cycle Analysis.
Practical: Study of IC Engine Components & Materials (Identification of multi cylinder block, head, piston, connecting rod, valves, crankshaft). -Draw Valve timing diagram for 4-stroke SI & CI engines-Draw Port timing diagram for 2-stroke SI & CI engines.
Fuel Supply and Ignition System: SI Engine: Air – Fuel ratio, Air Filters, throttle, Simple Carburetor – Injection systems – Single point and Multipoint fuel injection – Gasoline Direct Injection. Ignition System – Battery Ignition System – Electronic Ignition Systems, Laser Ignition basics.
CI Engine: Jerk type fuel injection pump – Distributor type fuel injection pump. Common rail direct injection system – Fuel injector.
Practical: Dismantling and detailed study of major components followed by reassembly of a multi-cylinder petrol engine. Dismantling and detailed study of major components followed by reassembly of a multi-cylinder diesel engine.
Combustion in SI Engines: Basic Fuel Properties of Gasoline – Combustion Process – Stages of Combustion, Flame Propagation, Flame Velocity, and Flame Front Area – Rate of Pressure Rise and Cycle-to-Cycle Variations – Abnormal Combustion: Ignition Delay, Knocking, and Detonation – Influence of Engine Operating and Design Parameters on Combustion.
Practical: Study of MPFI Engine (Dismantle & Assembly)
Combustion in CI Engines: Importance of Air Motion – Swirl, Squish, and Tumble – Swirl Ratio – Fuel–Air Mixing – Stages of Combustion – Delay Period and Factors Affecting Delay – Knock in CI Engines and Methods of Controlling Diesel Knock – CI Engine – Combustion Chambers: Types and Factors Influencing Combustion Chamber Design.
Practical: Study of CRDI Engine (Dismantle & Assembly)
Engine Subsystem and Advanced Technologies: Engine Subsystem: Types of Cooling Systems – Properties of Coolants – Crankcase Ventilation – Engine Lubrication, Supercharging and Turbocharging.
Advanced Technologies: Stratified charge engine, LHR, HCCI and RCCI Engines
Practical: Performance Test on a 4-Stroke Diesel Engine and Petrol engine.
Tasks:
T1. A car shows low mileage and reduced power – analyze causes and suggest improvements.
T2. A diesel engine has cold starting issues – identify reasons and propose solutions.
T3. A petrol engine experiences knocking at high speeds – analyze and reduce it.
T4. An engine overheats in traffic conditions – diagnose and suggest remedies.
Weightage: Continuous Assessment: 50%, End Semester Examinations: 50%
Assessment Methodology:
Written Test (40%), Practical (30%), Activity (30%).
Practical: Lab Experiments (50%), Tasks (50%) (Each student must complete a minimum of two tasks).
Activity: Review of GATE/ESE (10%), Mini Project/ Quiz/ Assignment Programs/ Flipped Class /Seminar Presentation (20%)
References:
1. V. Ganesan, Internal Combustion Engines, Tata‐McGraw Hill Publishing Co., New Delhi.
2. B.P. Pundir “Internal Combustion Engines”. Narosa Publishing House.
3. John B. Heywood, “Internal Combustion Engines”, McGraw‐Hill Book Company.
4. Richard Stone, “Introduction to Internal Combustion Engines”, SAE International, 2012.
5. M.L. Mathur and R.P. Sharma, Internal Combustion Engine, Dhanpath Rai Publications (P) Ltd.
6. G.F. Benson & D.A. Whitehouse, “Internal Combustion Engines”,Pergamon, 2013.
7. Heinz Heisler, Advanced engine technology. Butterworth Heinemann publications
8. K.K. Ramalingam, Internal Combustion Engines, Sci Tech Publications.
9. Obert, E.F, Internal Combustion Engine analysis and Practice.
