TI250010 Multi Level Power Converters Syllabus:

TI250010 Multi Level Power Converters Syllabus – Anna University UG Syllabus Regulation 2025

COURSE OBJECTIVES:
• To learn multilevel topology (Symmetry & Asymmetry) with common DC bus link.
• To study the working of cascaded H Bridge, Diode Clamped and Flying Capacitor MLI.
• To study the working of MLI with reduced switch count.
• To simulate three level diode clamped MLI and three level flying capacitor based MLI with resistive and reactive load
• To simulate the MLI with reduced switch count.

UNIT I – MULTILEVEL TOPOLOGIES
Introduction – Generalized topology with a common DC bus – Converters derived from the generalized topology – Symmetric topology without a common DC link – Asymmetric topology.

UNIT II – CASCADED H-BRIDGE MULTILEVEL INVERTERS
Introduction – H-bridge inverter – Bipolar pulse width modulation – Unipolar pulse width modulation – Multilevel inverter topologies – CHB inverter with equal DC voltage – H-bridges with unequal DC voltages – PWM – Carrier based PWM schemes – Phase shifted multicarrier modulation – Level shifted multicarrier modulation – Comparison between phase and level shifted PWM schemes – Staircase modulation.

UNIT III – DIODE CLAMPED MULTILEVEL CONVERTER
Introduction – Converter structure and functional description – Modulation of multilevel converters – Voltage balance control – Effectiveness boundary of voltage balancing in DCMC converters – Performance results.

UNIT IV – FLYING CAPACITOR MULTILEVEL CONVERTER
Introduction – Flying capacitor topology – Modulation scheme for the FCMC – Dynamic voltage balance of FCMC.

UNIT V – MULTILEVEL CONVERTER WITH REDUCED SWITCH COUNT
Multilevel inverter with reduced switch count – Structures – Working principles – Pulse generation methods.

30 PERIODS

LABCOMPONENT:30PERIODS
1. Simulation of fixed PWM and sinusoidal PWM for an inverter.
2. Simulation of an H-bridge inverter with R load.
3. Simulation of a three-level diode-clamped MLI with R load.
4. Simulation of a three-level capacitor-clamped MLI with R load.
5. Simulation of MLI with a reduced switch configuration.

TOTAL: 30+30=60PERIODS

TEXT BOOKS:
1. RashidM.H,”PowerElectronicsCircuits,DevicesandApplications”,PrenticeHallIndi a, Third Edition, New Delhi, 2014 Pearson 4th edition.
2. SergioAlbertoGonzalez, Santiago Andres Verne, Maria Ines Valla,”Multilevel Converters forIndustrial Applications”, CRC Press, 22-Jul-2013, 20171st Edition.
3. BinWu,MehdiNarimani,HighPowerConvertersandACdrivesbyIEEEpress2017 ,2ndEdition.

REFERENCE BOOKS:
1. ThomasA.Lipo,PulseWidth Modulation for Power Converters: Principles and Practice, D.Grahame Holmes, John Wiley & Sons, Oct-2003, 1st Edition.
2. FangLinLuo,HongYe,AdvancedDC/ACInverters:ApplicationsinRenewable Energy, CRC Press, 22-Jan-2013, 2017, 1st Edition.
3. Hani Vahedi, Mohamed Trabelsi, Single-DC-Source Multilevel Inverters, Springer, 2019, 1stEdition.
4. ErsanKabalcı,Multilevel Inverters Introduction and Emergent Topologies, AcademicPress Inc,2021, 1st Edition.
5. Iftekhar Maswood, Dehghani Tafti,Advanced Multilevel Converters and Applications in GridIntegration, Wiley, 2018, 1st Edition.