TI25005 Power Quality Syllabus:
TI25005 Power Quality Syllabus – Anna University UG Syllabus Regulation 2025
COURSE OBJECTIVES:
• To learn the basic definitions in power quality.
• To study power quality issues in single-phase and three-phase systems.
• To understand the principles of power system harmonics.
• To understand the use of DSTATCOM for harmonic mitigation.
• To learn the concepts related to series compensation.
UNIT I – INTRODUCTION
Introduction – Characterization of electric power quality: Transients, short duration and long duration voltage variations, voltage imbalance, waveform distortion, voltage fluctuations, power frequency variation, power acceptability curves – Power quality problems: Poor load power factor, non-linear and unbalanced loads, DC offset in loads, notching in load voltage, disturbance in supply voltage – Power quality standards.
UNIT II – ANALYSIS OF SINGLE PHASE AND THREE PHASE SYSTEM
Single phase linear and non-linear loads – Single phase sinusoidal and nonsinusoidal source supplying linear and non-linear loads – Three phase balanced system – Three phase unbalanced system – Three phase unbalanced and distorted source supplying non-linear loads – Concept of power factor – Three phase three wire system – Three phase four wire system.
UNIT III – MITIGATION OF POWER SYSTEM HARMONICS
Introduction – Principle of harmonic filters – Series tuned filters – Double band pass filters – Damped filters – Detuned filters – Active filters – Power converters – Harmonic filter design – Tuned filter – Second order damped filter – Impedance plots for filter banks – Impedance plots for a three branch 33 kV filter.
UNIT IV – LOAD COMPENSATION USING DSTATCOM
Compensating single phase loads – Ideal three phase shunt compensator structure – Generating reference currents using instantaneous p–q theory – Instantaneous symmetrical components theory – Generating reference currents when the source is unbalanced – Realization and control of DSTATCOM – DSTATCOM in voltage control mode.
UNIT V – SERIES COMPENSATION OF POWER DISTRIBUTION SYSTEM
Rectifier supported DVR – DC capacitor supported DVR – DVR structure – Voltage restoration – Series active filter – Unified power quality conditioner.
TOTAL:45 PERIODS
SKILL DEVELOPMENT ACTIVITIES (Group Seminar/Mini Project/Assignment/Content Preparation / Quiz/ Surprise Test / Solving GATE questions/ etc)
1. Harmonic analysis of single-phase power converters (semi-converters and full converters) with R and RL loads through simulation.
2. Harmonic analysis of three-phase power converters (semi-converters and full converters) with R and RL loads through simulation.
3. Harmonic analysis of single-phase inverters with R and RL loads through simulation.
4. Harmonic analysis of three-phase inverters with R and RL loads through simulation.
5. Mitigation of harmonics using tuned filters.
List of Open Source Software/Learning website:
1. http://nptel.iitm.ac.in/courses.php
2. https://old.amu.ac.in/emp/studym/2442.pdf
3. https://electricalacademia.com/electric-power
4. https://www.intechopen.com/books/6214
5. https://www.cde.com/resources/technical-papers/Mitigation-of-Harmonics.pdf
6. https://www.academia.edu/43237017/Use_Series_Compensation_in_Distribution_ Networks_33_KV
TEXTBOOKS:
1. Arindam Ghosh and GeradLedwich“ Power Quality Enhancement Using Custom Power Devices”, Kluwer Academic Publishers, First Edition,2002
2. G.T.Heydt, “Electric Power Quality”, Starsina Circle Publications, Second Edition, 2011.
3. George J.Wakileh, “Power System Harmonics –Fundamentals, Analysis and Filter Design”, Springer – Verlag Berlin Heidelberg, New York, 2019.
REFERENCES:
1. R.C.Duggan“Electric Power Systems Quality”,Tata MCGrawHill Publishers, Third Edition, 2012.
2. Arrillga“PowerSystem Harmonics”,JohnWiely andS ons,2003 2ndEdition.
3. Derek A.Paice “Power Electronic Converter Harmonics” IEEE Press, 1995, Wiley – IEE Press 1999, 18th Edition.
