CH25C08 Process Dynamics and Control Syllabus:
CH25C08 Process Dynamics and Control Syllabus – Anna University UG Syllabus Regulation 2025
Course Objectives: To provide knowledge on process dynamics, mathematical modeling, controller design, stability analysis and advanced process control strategies used in chemical process industries.
Basics of Process Control: Process instrumentation – Need of measuring instruments, performance characteristics – static and dynamic, principal measuring instruments – pressure, temperature, flow rate, liquid level, pH and concentration; Laplace transforms – properties of Laplace transforms, solution of ODE using Laplace transforms, forcing functions.
Activities: Analyze the characteristics and applications of industrial measuring instruments, apply Laplace transforms for solving process dynamic equations.
Open Loop Systems: Introduction to chemical process control; formulating process models using transfer function approach; Open-loop systems – first order systems and their transient response for standard inputs, first order systems in series, linearization and its application in process control; second order systems and their dynamics; transportation lagfirst order and second order Pade approximation.
Practical:
1. Open loop response of first order system (Thermometer & Thermo well)
2. Open loop response of a single capacity tank system
3. Open loop response of second order system (U tube manometer)
4. Open loop response of non-interacting level System
5. Open loop response of Interacting level System
Activities: Develop transfer function models for process systems, analyze transient response of first and second order systems, evaluate transportation lag effects and linearization techniques in process control applications.
Closed Loop Systems: Closed loop control systems – development of block diagram, servo and regulatory problems, transfer function for controllers and final control element – Types of control valve – sizing & characteristics, modes of control action – ON/OFF, P, PI, PD, PID and their characteristics, transient response of closed-loop control systems, stability analysis using Routh’s test.
Practical:
1. Closed loop control and tuning of a pressure system
2. Closed loop control and tuning of a flow system
3. Closed loop control and tuning of a thermal system
4. Control valve characteristics
Activities: Analyze closed loop control system performance, evaluate controller tuning and control valve characteristics, determine system stability using Routh stability criterion.
Control System Design by Frequency Response: Introduction to frequency response of closed-loop systems, control system design by frequency response techniques, bode diagram, stability criterion, tuning of controllers – Ziegler Nichols and Cohen-Coon tuning methods.
Practical: Ziegler Nichols and Cohen-coon tuning method
Activities: Interpret frequency response characteristics using Bode plots, analyze stability using frequency domain techniques, compare controller tuning methods for process control systems.
Digital Control Systems: Introduction to advanced control systems – cascade control, feed forward control, ratio control, multivariable control; Introduction to digital control, Programmable Logic Controller (PLC), Distributed Control System (DCS), SCADA.
Practical: PLC based closed loop control and tuning of a level system
Activities: Analyze advanced process control strategies, evaluate digital control architectures such as PLC, DCS and SCADA, compare conventional and computer-based process control systems.
Weightage: Continuous Assessment: 50%, End Semester Examinations: 50%
Assessment Methodology: Assignments/module activities (20%), Laboratory performance and record (25%), Practical skill assessment (15%), Internal Examinations (40%).
References:
1. Stephanopoulos G., “Chemical Process Control”, Vol. 2, Prentice Hall, 1984. ISBN: 9789332549463.
2. Ogunnaike B.A. and Ray W.H., “Process Dynamics, Modeling and Control”, Oxford University Press, 1994. ISBN: 9780195091199.
3. Coughanowr D.R. and LeBlanc S.E., “Process Systems Analysis and Control”, 3rd Edition, McGraw-Hill, 2008. ISBN: 9780073397894.
4. Bequette B.W., “Process Control: Modeling, Design and Simulation”, Prentice Hall Professional, 2003.
5. Seborg D.E., Mellichamp D.A., Edgar T.F. and Doyle F.J., “Process Dynamics and Control”, John Wiley & Sons, 2010.
6. Riggs J.B. and Karim M.N., “Chemical and Bio-process Control”, Prentice Hall, 2006.
7. Luyben W.L., Tyreus B.D. and Luyben M.L., “Plantwide Process Control”, McGraw-Hill, 1998.
8. Peter Harriott, “Process Control”, McGraw-Hill, 1964.
E-Resources:
1. NPTEL course on Process Dynamics and Control.
2. NPTEL course on Chemical Process Control and Instrumentation.
3. SWAYAM online modules on process automation and controller tuning.
4. Industrial case studies on PLC, DCS and SCADA systems.
