MV25301 Marine Engines I Syllabus:
MV25301 Marine Engines I Syllabus – Anna University UG Syllabus Regulation 2025
Course Objectives:
This course provides knowledge of marine diesel engines, including design, construction, combustion, and fuel systems. It enables students to analyze engine performance, apply operational principles, and understand modern marine propulsion and auxiliary systems.
Marine Diesel Engine Fundamentals: Design Features of marine diesel Engine 2-stroke and 4-stroke cycles, deviation from ideal condition in actual engines. Timing diagrams of 2-stroke timing diagrams of 4-stroke. Marine diesel engine of MAN/B&W/Sulzer make etc, Comparative study of Cross head type, trunk type, slow speed, medium speed and high-speed diesel engines.
Practical: Study of Construction and Working of 2-Stroke Slow Speed Marine Diesel Engine
Construction and Components: Constructional Details of IC Engines Principal components, Bed plates, A frames, Welded construction of bed plates and frames, Foundation Bolts, Tie rods, Crank Shaft , connecting rods, cross heads, Bearings, Piston assembly, Jackets and liners, cylinder heads, Exhaust Valves, etc.
Practical: Study of Liner, Piston, Cylinder Head, Exhaust Valve, Cross head Assembly, Main Bearing, Stuffing Box and Tie Rod of 2-Stroke Slow Speed Marine Diesel Engine.
Scavenging and Turbocharging: Scavenging and Supercharging System Scavenging arrangements in 2-stroke engines, Various types of scavenging, their merits and demerits, Turbocharger and its details, Pulse type and constant pressure type turbo charging, air cooled – water cooled turbocharger casing. Centrally supported and end supported shaft bearings and types, sealing arrangements and lubrication arrangement.
Practical: Demonstration of Turbocharger Construction and Working Principle
Combustion and Fuel Injection Systems: Combustion of fuels in IC engines. Preparation of fuels for efficient combustion, Fuel atomization, Requirements for fuel injectors, high pressure pipes and jacketing arrangement, provision of fuel leak off alarms. Design aspect for combustion chambers. Recirculation type and slide type fuel injector, Design aspect of modern injectors, Ignition delay, Injection delay etc. Fuel injection system, Jerk type fuel pump, (Fuel pumps in Sulzer RTA & MAN B&W MC engines), Pump timing of different marine diesel engines. common rail system- Sulzer RT Flex.
Practical:
• Study of Fuel Pump Construction and Operation,
• Calibration of Fuel Injection Timing in Diesel Engines
• Fuel Injector Testing
Tasks:
T1. A marine diesel engine shows poor fuel efficiency at sea – analyze combustion and fuel injection system.
T2. A ship engine experiences scavenging inefficiency – evaluate system type and suggest improvements.
T3. A turbocharged engine shows low power output – diagnose turbocharger and air supply issues.
T4. A marine engine faces frequent injector failures – analyze fuel system and recommend solutions.
Weightage: Continuous Assessment: 50%, End Semester Examinations: 50%.
Assessment Methodology:
Written Test (40%), Practical (30%), Activity (30%).
Practical: Lab Experiments (50%), Tasks (50%) (Each student must complete a minimum of two tasks).
Activity: Review of GATE/ESE Questions (10%), Mini Project/ Quiz/ Assignment Programs/ Flipped Class /Seminar Presentation (20%)
References:
1. D.A. Taylor, “Introduction to Marine Engineering”, 2nd Edition, Butter worth – Heinemann, London, 1999
2. Wood yard, Doug, “Pounder’s Marine Diesel Engines”, 7th Edition, Butter Worth Heinemann Publishing, London, 2001
3. Leslie Jackson, Thomas D Morton, Paul A Russe l, “Motor Engineering Knowledge For Marine Engineers”, 3rd Ed. Reeds Vol 12, Adlard Coles Nautical, London, 1994
4. Marine Diesel Engines Vol I &Vol II. Notes by Prof K Venkatrara
5. M.E.P., “Low Speed Diesel Engines New”, Marine Engineering Practice, Vol-2 Part17,, IMarEST, London, 2004 2. S. H. Henshall, “Medium and High Speed Diesel Engines for Marine Use”, 1st Edition, Institute of Marine Engineers, Mumbai, 1996.
6. D.K. Sanyal, “Principle & Practice of Marine Diesel Engines”, 2nd Edition, Bhandarkar Publication, Mumbai, 1998.
7. Mathur, M.L., Sharma, R.P., “ Internal Combustion Engines”, 7th Ed. Dhanpat rai Publications, REPRINT 2002.
