AR25204 Building Components and Measured Drawing Syllabus:

AR25204 Building Components and Measured Drawing Syllabus – Anna University UG Syllabus Regulation 2025

Course Objectives:
• To introduce the components of a typical building and their nomenclature.
• To introduce the concept of scale and enable understanding of a building through measured drawing.
• To give skills of representing physical characteristics of materials.
• To give skills in isometric and perspective projections of the measured building.

Introduction to Building Components and their Nomenclature: Building as act of construction for human use layered over the earth – foundation, structural systems, enclosures, weather protection. Understanding building components and their nomenclature using historic and contemporary examples from literature study, site visits, sketches. The nomenclature to include 1) basic types of construction such as load bearing/framed/space structure 2) basic components in a building such as foundation, plinth, walls, floors, roofs(flat, sloped, vaulted),roof covering, ceilings, staircases (principles and different geometric types), doors, windows and ventilators, lintel, sunshade, coping, cornice, stringcourse, parapet, waterproofing, finishing, mortar, decoration, paving3) basic materials for the components.

Measured Drawing and Projections of Basic Components: Introduction to concept of scale and measured drawing through basic components such as handrails, furniture, arches, etc., Orthographic (plan, elevation, section) and isometric projection of the simple components. Representation of different materials through rendering, Perspective projection of simple components.

Measured Drawing of Historical Building: Understanding a historic building in totality or in part through measuring drawing.

Measured Drawing of Contemporary Building: Understanding a contemporary building in totality or in part through measuring drawing.

Total: 60 Periods

Weightage: Continuous Internal Assessment: 50%, End Semester Examinations: 50%.

Assessment Methodology: Three Assessments with equal weightage.
One Assessment as Internal written Test /Examination (33.33%), other two assessment (each assessment weightage – 33.33%) as continuous marking of the work and performance during the particular assessment period such as drawings, models, study, seminar, etc.,

Required Reading
• Francis D. K. Ching, ‘Architectural Graphics’ John Wiley and Sons, 2009.
• Rendow Yee, ‘Architecture Drawing: A Visual Compendium of Types and Methods’, John Wiley and Sons, 2012.
• Francis D. K. Ching, Steven P. Juroszek, ‘Design Drawing’, John Wiley and Sons, 2010.

References:
1. John M. Holmes, ‘Applied Perspective’, 2nd edition, Sir Isaac, Pitman and Sons Ltd., London 1967.
2. Robert W. Gill, ‘Basic Perspective’, Thames and Hudson, London, 2006.
3. Leslie Martin C., ‘Architectural Graphics’, 2nd edition, The Macmillan Company, New York,1970.
4. Natascha Meuser, ‘Drawing for Architects: Construction and Design Manual’, Dom Pub, 2015.
5. Emmitt, Stephen, Barry’s Introduction to Construction of Buildings, 4th Edition, Wiley-Blackwell, United Kingdom, 2018.
6. Merritt, F.S. and Ricketts, J.T., Building Design and Construction Handbook, Sixth Edition, McGraw-Hill Professional, New York, 2000.
7. Swallow, P., Dallas, R., Jackson, S. and Watt, D., Measurement and Recording of Historic Buildings, 2nd Edition, Routledge, London and New York, 2013.
8. Edwards, B., Understanding Architecture Through Drawing, 2nd Edition, Routledge, London and New York, 2003.
9. Ching, F.D.K. and Juroszek, S.P., Design Drawing, 3rd Edition, Wiley, New Jersey, 2019.

E Resources/ E Books :
1. Architects’ drawings – A selection of sketches by world famous architects through history by Kendra Schank Smith, 2005
2. Drawing with pen & ink – A word concerning the brush by Arthur.l.Guptill with an introduction by Franklin Booth, 1930
3. Building construction hand book tenth edition by Roy Chudleyand Roger Greeno, 2014.