PC25C02 Design of Pressure Vessels and Storage Vessels Syllabus:
PC25C02 Design of Pressure Vessels and Storage Vessels Syllabus – Anna University UG Syllabus Regulation 2025
Course Objective: To provide comprehensive knowledge on the fundamentals, design criteria, component design calculations, fabrication methods, inspection procedures, and safety standards involved in pressure vessels and storage vessels used in petrochemical industries.
Design of Pipe Fittings and Joints: Stress-strain relationships – elastic materials – tensile forces – compressive forces – shear forces – membrane stresses – shells of revolution – theories of failure – design of bolts – schematic of screws – design of shafts – design of couplings.
Activity: Identification of pressure vessels used in petrochemical industries, ASME Section VIII design practices, material selection analysis for high-pressure applications, and industrial case studies on vessel failures.
Design of Pressure Vessels: Unfired pressure vessels – pressure vessel codes – design of cylindrical shells – design of spherical shells – internal pressure – external pressure – flat plate closures – torispherical closures – ellipsoidal closures – conical closures – shell design – tall vertical vessels – nozzle openings – compensation of openings.
Activity: CAD drawing of vessel heads and nozzles, calculation of nozzle reinforcement area, mini project on flange selection and gasket design, and virtual demonstration of pressure relief systems.
Design of Storage Vessels: Storage tank codes – classification of tanks – design of shell – design of bottom plates – self-supported roofs – column-supported roofs – wind girders – nozzles – accessories for storage tanks.
Activity: CAD Modelling, Design Calculations, Simulation, Component Analysis, Case Study, Technical Discussion.
Fabrication and Materials: Fabrication steps – vessel lining – materials for chemical equipment – vessel coatings – selection of coatings – application of coatings – selection of materials for process equipment – material selection for process fluids.
Activities: Layout Preparation, Industrial Visit, Wind Load Calculations, Tank Design Comparison, Structural Analysis, Technical Discussion.
Design of Supports for Vessels: Types of supports – design of skirts – design of brackets – design of saddle supports – design of leg supports – special types of vessel supports.
Activities: Welding and NDT Demonstration, Hydrostatic Testing Analysis, Software Modelling using PV Elite/AutoCAD/Solid Works, and Safety Case Study on Pressure Vessel Accidents.
Weightage: Continuous Assessment: 40%, End Semester Examinations: 60%
Assessment Methodology: Assignments (10%), Design calculations and applicationoriented problems (10%), Solving competitive examination questions (10%), Internal Examinations (70%).
References:
1. Khurmi, R.S. and Gupta, J.K., Textbook of Machine Design, S. Chand & Company Ltd., 25th Edition, 2005.
2. Joshi, M.V. and Mahajan, V.V., Process Equipment Design, Macmillan India Ltd., 3rd Edition, 1994.
3. Bhattacharyya, B.C., Introduction to Chemical Equipment Design: Mechanical Aspects, CBS Publishers & Distributors, New Delhi, 2011.
4. Brownell, L.E. and Young, E.H., Process Equipment Design, Wiley Eastern Ltd., New Delhi, 2009.
5. Moss, D.R. and Basic, M., Pressure Vessel Design Manual, 4th Edition, Elsevier, 2013.
6. Dawande, S.D., Process Design of Equipments, Central Techno Publications, Nagpur, 2000.
7. Indian Standard Specifications IS 803:1962, IS 4072:1967 and IS 2825:1969, Bureau of Indian Standards (BIS), New Delhi.
8. Perry, R.H. and Green, D.W., Perry’s Chemical Engineers’ Handbook, McGraw-Hill Education.
9. Ludwig, E.E., Applied Process Design for Chemical and Petrochemical Plants, Volumes I, II & III, Gulf Publishing Company.
10. Coulson, J.M. and Richardson, J.F., Chemical Engineering, Volume 6 – Chemical Engineering Design, Asian Books Pvt. Ltd.
E-Resources:
1. NPTEL Course on Process Equipment Design:
2. NPTEL Course on Equipment Design: Mechanical Aspects:
3. YouTube: Design of Cylinders & Pressure Vessels – Lecture:
4. YouTube: Storage Tank Design Basics:
https://www.youtube.com/watch?v=6HAmM0_LWuc
