TI25035 Nonlinear Control Syllabus:
TI25035 Nonlinear Control Syllabus – Anna University UG Syllabus Regulation 2025
COURSE OBJECTIVES:
To provide knowledge on design in state variable form
• To provide knowledge in phase plane analysis.
• To give basic knowledge in describing function analysis.
• To study the design of optimal controller.
• To study the design of optimal estimator including Kalman Filter
UNIT I STATEVARIABLEDESIGN
Introduction to state Model- effect of state Feedback-Necessary and Sufficient Condition for Arbitrary Pole-placement- pole placement Design- design of state Observers- separation principle- servo design: -State Feedback with integral control
UNIT II PHASEPLANE ANALYSIS
Features of linear and non-linear systems -Common physical non-linearities– Methods of linearization Concept of phase portraits –Singular points–Limit cycles–Construction of phase portraits–Phase plane analysis of linear and non-linear systems–Isocline method.
UNIT III DESCRIBING FUNCTION ANALYSIS
Basic concepts, derivation of describing functions for common on -linearities– Describing function analysis of non-linear systems–limit cycles–Stability of oscillations.
UNIT IV OPTIMALCONTROL
Introduction-Time varying optimal control–LQR steady state optimal control– Solution of Ricatti’s equation–Application examples.
UNIT V OPTIMALESTIMATION
Optimal estimation – Kalman Bucy Filter – Solution by duality principle-Discrete systems- Kalman Filter-Application examples.
TOTAL:45PERIODS
SKILL DEVELOPMENT ACTIVITIES (Group Seminar /Mini Project/Assignment/ Content Preparation /Quiz /Surprise Test/Solving GATE questions/ etc)
1 Design of linear quadratic regulator (LQR)control system for any application of your own
2 Familiarization of Kalman filter in MATLAB
3 Seminar on pole placement design
TEXTBOOKS:
1. G.J.Thaler, “Automatic Control Systems ”, Jaico Publishing House 1993.
2. M.Gopal, Modern Control System Theory, NewAge International Publishers,2002,2ndEdition.
3. K. P. Mohandas, “Modern Control Engineering”, Sanguine Technical Publishers, 2006, 1stEdition.
REFERENCES:
1. Ashish Tewari, ‘Modern Control Design with Matlab and Simulink’, John Wiley, New Delhi, 2002, 1st Edition.
2. K.Ogata,‘ModernControlEngineering’,5thEdition,PHI,NewDelhi,2009.
3. T.GladandL.Ljung,,“ControlTheory–MultivariableandNonLinearMethods”,Taylor & Francis, 2002, 1st Edition.
4. D.S.Naidu, “Optimal Control Systems ”First Indian Reprint, CRC Press, 2009,1st Edition.
5. William S Levine, “Control System Fundamentals,” The Control Handbook, CRC Press, Tayler and Francies Group, 2011, 2ndEdition.
List of Open Source Software/ Learning website:
https://in.mathworks.com/discovery/kalman-filter.html
https://in.mathworks.com/help/control/getstart/design-an-lqr-servo-controllerinsimulink.html
https://onlinecourses.nptel.ac.in/noc22_ee24/preview
http://www.nitttrc.edu.in/nptel/courses/video/101108047/lec22.pdf
