MV25407 Thermal Engineering and Boiler Chemistry Laboratory Syllabus:

MV25407 Thermal Engineering and Boiler Chemistry Laboratory Syllabus – Anna University UG Syllabus Regulation 2025

Course Objectives:
1. To study the performance of an internal combustion engine
2. To study the characteristics of fuels and lubricants used in marine engines.
3. To study the performance of steam generator and steam turbine
4. To perform the tests on boiler feed water and fresh water used for engine cooling.

Thermal Engineering Laboratory
List of Experiments
1. To conduct Performance test on steam turbine
2. To determine dryness fraction of steam using steam calorimeter
3. To determine Flash point of given fuel oil
4. To determine Fire point of given fuel oil
5. To determine viscosity of oil using redwoods viscometer
6. To conduct performance test on Diesel engine with AVL setup
7. To conduct heat balance test on Diesel engine setup.
8. Test on Reciprocating compressor.
9. C.O.P. of a Refrigeration plant.
10. Performance test on A/C plant.

Boiler Chemistry Laboratory
List of Experiments
1. To determine the hardness content of the sample of boiler water in ppm in terms of CaCO3.
2. To determine the chloride content of the sample of water in ppm in terms of CaCO3.
3. To determine the alkalinity due to Phenolphthalein, total alkalinity and Caustic alkalinity of the sample of water (in ppm).
4. To determine the phosphate content of the sample of water.
5. To determine the dissolved Oxygen content of the sample of water.
6. To determine the sulphate content of given sample of water.
7. To determine the pH-value of the given sample of water.
8. Testing of boiler water – Dissolved oxygen, total-dissolved solids, turbidity.

References:
1. Flanagan, G.T.H, ‘Marine Boilers”, 3rd Edition, Elsevier, 2015
2. Kothandaraman & Domkundwar, A Course In Thermal Engineering, Dhanpat Rai & Co, 2013
3. Ganesan V, Internal Combustion Engines, McGraw-Hill, New York, 1996